Venza AWD V6-3.5L (2GR-FE) (2010)
Vacuum Brake Booster: Service and Repair
Removal
BRAKE SYSTEM (OTHER): BRAKE BOOSTER: REMOVAL
NOTICE:
Release the vacuum from the booster by depressing the brake pedal several times. Then remove the brake master cylinder from the
brake booster.
1. REMOVE FRONT WIPER ARM HEAD CAP
2. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front
Wiper Motor/Removal
3. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front
Wiper Motor/Removal
4. REMOVE FRONT FENDER TO COWL SIDE SEAL LH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Removal
5. REMOVE FRONT FENDER TO COWL SIDE SEAL RH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Removal
6. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front
Wiper Motor/Removal
7. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front
Wiper Motor/Removal
8. REMOVE OUTER COWL TOP PANEL See: Steering and Suspension/Suspension/Suspension Strut / Shock Absorber/Service and Repair/Front
Shock Absorber/Removal
9. REMOVE AIR CLEANER CAP SUB-ASSEMBLY (for 1AR-FE) See: Powertrain Management/Fuel Delivery and Air Induction/Throttle
Body/Service and Repair/Removal
10. REMOVE AIR CLEANER CAP SUB-ASSEMBLY (for 2GR-FE) See: Powertrain Management/Fuel Delivery and Air Induction/Throttle
Body/Service and Repair/Removal
11. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY
12. REMOVE AIR CLEANER CASE (for 1AR-FE) See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Removal
13. REMOVE AIR CLEANER CASE (for 2GR-FE) See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Removal
14. REMOVE SECURITY HORN ASSEMBLY (w/ Security Horn) See: Accessories and Optional Equipment/Antitheft and Alarm Systems/Alarm
Horn/Service and Repair/Removal
15. REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY See: Hydraulic System/Brake Master Cylinder/Service and Repair/Removal and
Replacement/Removal
16. SEPARATE NO. 1 VACUUM HOSE CONNECTOR (for 1AR-FE)
(a) Slide the clip and disconnect the vacuum hose from the brake booster assembly.