Venza AWD V6-3.5L (2GR-FE) (2010)
Radiator: Service and Repair
Removal
2GR-FE COOLING: RADIATOR: REMOVAL
1. REMOVE NO. 1 ENGINE UNDER COVER
2. REMOVE NO. 2 ENGINE UNDER COVER
3. DRAIN ENGINE COOLANT See: Coolant/Service and Repair
4. REMOVE V-BANK COVER SUB-ASSEMBLY See: Engine/Service and Repair/Removal and Replacement/Engine Assembly/Removal
5. REMOVE COOL AIR INTAKE DUCT SEAL See: Engine/Service and Repair/Removal and Replacement/Engine Assembly/Removal
6. REMOVE INLET NO. 2 AIR CLEANER See: Engine/Service and Repair/Removal and Replacement/Engine Assembly/Removal
7. REMOVE AIR CLEANER CAP WITH HOSE See: Powertrain Management/Fuel Delivery and Air Induction/Throttle Body/Service and
Repair/Removal
8. REMOVE AIR CLEANER CASE See: Engine/Service and Repair/Removal and Replacement/Engine Assembly/Removal
9. REMOVE BATTERY See: Engine/Service and Repair/Removal and Replacement/Engine Assembly/Removal
10. REMOVE INLET NO. 1 AIR CLEANER See: Engine/Service and Repair/Removal and Replacement/Engine Assembly/Removal
11. REMOVE RADIATOR GRILLE PROTECTOR See: Body and Frame/Grille/Service and Repair/Removal
12. REMOVE RADIATOR GRILLE See: Body and Frame/Grille/Service and Repair/Removal
13. REMOVE LOW PITCHED HORN ASSEMBLY See: Lighting and Horns/Horn/Service and Repair/Low Pitched Horn/Removal
14. REMOVE HIGH PITCHED HORN ASSEMBLY See: Lighting and Horns/Horn/Service and Repair/High Pitched Horn/Removal
15. REMOVE HOOD LOCK ASSEMBLY (w/o Engine Hood Courtesy Switch) See: Body and Frame/Doors, Hood and Trunk/Hood/Hood Latch
Release Cable/Service and Repair/Removal
16. REMOVE HOOD LOCK ASSEMBLY (w/ Engine Hood Courtesy Switch) See: Body and Frame/Doors, Hood and Trunk/Hood/Hood Latch
Release Cable/Service and Repair/Removal
17. DISCONNECT OUTLET RESERVE TANK HOSE
(a) Disconnect the outlet reserve tank hose from the radiator.
18. DISCONNECT NO. 1 RADIATOR HOSE
(a) Disconnect the No. 1 radiator hose from the radiator.