Venza AWD V6-3.5L (2GR-FE) (2010)
Engine Mount Control Actuator: Testing and Inspection
2GR-FE ENGINE CONTROL: VACUUM SWITCHING VALVE (for Engine Mounting): INSPECTION
1. INSPECT DUTY VACUUM SWITCHING VALVE (OPERATION)
(a) Check the operation of the duty vacuum switching valve when positive battery voltage is applied to its terminals.
Standard Condition:
2. INSPECT DUTY VACUUM SWITCHING VALVE (RESISTANCE)
(a) Measure the resistance according to the value(s) in the table below.
Text in Illustration
Standard Resistance:
(b) If the resistance is not as specified, replace the duty vacuum switching valve.