Venza AWD V6-3.5L (2GR-FE) (2010)
(3) If the operation is not as specified, check the oil control valve, wire harness and ECM.
(4) Enter the following menus: Powertrain / Engine / Active Test / Control the VVT Exhaust Linear (Bank 2).
(5) Check the engine speed when the oil control valve is operated using the Techstream with the engine coolant temperature at 50°C (122°F)
or less.
HINT
*
When performing the Active Test, the air conditioning should be on.
*
Engine coolant temperature when the engine is started should be 30°C (86°F) or less.
Standard Condition:
(6) If the operation is not as specified, check the oil control valve, wire harness and ECM.