Venza AWD V6-3.5L (2GR-FE) (2010)
32. REMOVE COOLER CONDENSER ASSEMBLY See: Condenser HVAC/Service and Repair/Removal and Replacement/Removal
33. REMOVE RADIATOR ASSEMBLY AND FAN ASSEMBLY WITH MOTOR See: Engine, Cooling and Exhaust/Cooling
System/Radiator/Service and Repair/Removal
34. DISCONNECT COOLER REFRIGERANT DISCHARGE HOSE
(a) Remove the bolt and disconnect the cooler refrigerant discharge hose from the compressor and magnetic clutch.
(b) Remove the O-ring from the discharge hose.
NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
35. DISCONNECT SUCTION HOSE SUB-ASSEMBLY
(a) Remove the bolt and disconnect the suction hose sub-assembly from the compressor and magnetic clutch.
(b) Remove the O-ring from the suction hose sub-assembly.
NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
36. REMOVE COMPRESSOR AND MAGNETIC CLUTCH
(a) Disengage each clamp.
(b) Disconnect each connector.
(c) Remove the 4 bolts, bracket, and the compressor and magnetic clutch.