Venza AWD V6-3.5L (2GR-FE) (2010)
/Page-1920008.png)
Installation
HEATING / AIR CONDITIONING: COMPRESSOR (for 2GR-FE): INSTALLATION
1. TEMPORARILY TIGHTEN COMPRESSOR AND MAGNETIC CLUTCH
(a) Temporarily install the compressor and magnetic clutch and bracket with the 4 bolts.
2. INSTALL COMPRESSOR AND MAGNETIC CLUTCH
(a) Install the compressor and magnetic clutch and bracket with the 4 bolts.
Torque : 25 Nm (255 kgf-cm, 18 ft-lbf)
NOTICE:
Tighten the bolts in the order shown in the illustration to install the compressor and magnetic clutch.
(b) Engage each clamp.
