Venza AWD V6-3.5L (2GR-FE) (2010)
Text in Illustration
102. REMOVE NO. 2 INSTRUMENT PANEL BRACE SUB-ASSEMBLY
(a) Disengage each clamp and remove the screw.
(b) Remove the bolt and disconnect the earth wire.
(c) Remove the bolt, 2 nuts and No. 2 instrument panel brace sub-assembly.
Text in Illustration
103. REMOVE INSTRUMENT PANEL REINFORCEMENT ASSEMBLY WITH AIR CONDITIONING UNIT ASSEMBLY
(a) Remove the bolt, 2 nuts and screw.
(b) Disconnect the blower motor connector.
(c) Disconnect each connector.
(d) Disengage each clamp.