Venza AWD V6-3.5L (2GR-FE) (2010)
105. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
106. ADD ENGINE COOLANT See: Engine, Cooling and Exhaust/Cooling System/Coolant/Service and Repair
107. INSPECT FOR COOLANT LEAK See: Engine, Cooling and Exhaust/Cooling System/Testing and Inspection
108. CHARGE WITH REFRIGERANT See: Service and Repair
109. WARM UP ENGINE See: Service and Repair
110. INSPECT FOR REFRIGERANT LEAK See: Service and Repair
111. INSPECT STEERING PAD See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering Pad/Installation
112. INSPECT FRONT SEAT ASSEMBLY (for Power Seat) See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seat
Assembly (for Power Seat)/Installation
113. INSPECT SRS WARNING LIGHT
See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System
114. INSPECT SEAT BELT WARNING SYSTEM
See: Restraint Systems/Seat Belt Systems/Testing and Inspection/Component Tests and General Diagnostics
115. INSPECT SHIFT LEVER POSITION
for U660F: See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Shift Linkage/Shift Cable/Adjustments
for U660E:
116. ADJUST SHIFT LEVER POSITION
for U660F: See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Shift Linkage/Shift Cable/Adjustments
for U660E: