Venza AWD V6-3.5L (2GR-FE) (2010)
Cabin Temperature Sensor / Switch: Service and Repair
Removal
HEATING / AIR CONDITIONING: ROOM TEMPERATURE SENSOR: REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
2. REMOVE FRONT DOOR SCUFF PLATE LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Removal
3. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
and Replacement/Removal
4. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Removal
5. REMOVE ROOM TEMPERATURE SENSOR
(a) Disengage the 2 claws and remove the room temperature sensor.