Venza AWD V6-3.5L (2GR-FE) (2010)
(a) Observe the following precautions when removing and installing a fuel injector:
(1) Never reuse an O-ring.
(2) When placing a new O-ring onto an injector, do not damage the O-ring.
(3) Coat a new O-ring with spindle oil or gasoline before installing it.
NOTICE:
Do not use engine oil, gear oil or brake fluid.
(b) Install the injector to the delivery pipe and the lower intake manifold as shown in the illustration.
Text in Illustration
NOTICE:
Before installing the injector, be sure to apply appropriate lubricant or gasoline where the delivery pipe or cylinder head contacts the
injector O-rings.
5. FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE
(a) Do not disconnect the tube shown in the illustration when disassembling the fuel suction tube assembly with pump and gauge. Doing so will
cause reassembly of the fuel suction tube assembly with pump and gauge to be impossible as the tube is welded to the plate.