Venza AWD V6-3.5L (2GR-FE) (2010)
Body Control Module: Service and Repair
Removal
POWER DISTRIBUTION: MAIN BODY ECU: REMOVAL
1. REMOVE UPPER INSTRUMENT PANEL
HINT
Refer to the procedure up to Remove Upper Instrument Panel Sub-assembly See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair/Removal and Replacement/Removal.
2. REMOVE MAIN BODY ECU (DRIVER SIDE JUNCTION BLOCK ASSEMBLY)
(a) Disconnect the 4 connectors.
(b) Disengage the 2 claws and disconnect the connector [A] as shown in the illustration.
(c) Disconnect the 3 connectors.
(d) Disconnect the 3 connectors as shown in the illustration.
(e) Disconnect the connector [A] as shown in the illustration.