Venza AWD V6-3.5L (2GR-FE) (2010)
/Page-996041.png)
C -- REPAIR OR REPLACE CAN BUS BRANCH WIRE OR CONNECTOR (CAN NO. 1 JUNCTION CONNECTOR - 4WD
CONTROL ECU)
B -- CHECK FOR SHORT IN CAN BUS WIRES (CAN NO. 1 JUNCTION CONNECTOR)
A -- Continue to next step.
6. CHECK FOR SHORT IN CAN BUS WIRE (CAN NO. 1 JUNCTION CONNECTOR - POWER MANAGEMENT CONTROL ECU)
(a) Disconnect the power management control ECU connector (D43).
Text in Illustration
Text in Illustration
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
