Venza AWD V6-3.5L (2GR-FE) (2010)
/Page-996049.png)
Text in Illustration
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE CAN BUS BRANCH WIRE OR CONNECTOR (CAN NO. 2 JUNCTION CONNECTOR - YAW
RATE SENSOR)
OK -- Continue to next step.
17. CHECK FOR SHORT IN CAN BUS WIRE (CAN NO. 2 JUNCTION CONNECTOR - STEERING ANGLE SENSOR)
(a) Disconnect the steering angle sensor connector.
