Venza AWD V6-3.5L (2GR-FE) (2010)
/Page-996053.png)
(a) Disconnect the certification ECU connector.
Text in Illustration
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE CAN BUS BRANCH WIRE OR CONNECTOR (CAN NO. 2 JUNCTION CONNECTOR -
CERTIFICATION ECU)
OK -- Continue to next step.
21. CHECK FOR SHORT IN CAN BUS WIRES (CAN NO. 2 JUNCTION CONNECTOR)
(a) Reconnect the CAN No. 2 junction connector.
(b) Measure the resistance according to the value(s) in the table below.
