Venza AWD V6-3.5L (2GR-FE) (2010)
NG -- REPLACE STEERING ANGLE SENSOR
OK -- Continue to next step.
25. CHECK FOR SHORT IN CAN BUS WIRE (POWER STEERING ECU)
(a) Reconnect the power steering ECU connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
Result:
C -- REPLACE POWER STEERING ECU
B -- REPLACE MAIN BODY ECU (DRIVER SIDE JUNCTION BLOCK)
A -- Continue to next step.
26. CHECK FOR SHORT IN CAN BUS WIRES (MAIN BODY ECU)
(a) Reconnect the main body ECU connector.
(b) Measure the resistance according to the value(s) in the table below.