Venza AWD V6-3.5L (2GR-FE) (2010)
NG -- REPAIR OR REPLACE CAN BUS BRANCH WIRE OR CONNECTOR (CAN NO. 1 JUNCTION CONNECTOR - 4WD
CONTROL ECU)
OK -- REPLACE 4WD CONTROL ECU
12. CHECK FOR SHORT TO GND IN CAN BUS WIRE (CAN NO. 2 JUNCTION CONNECTOR - CENTER AIRBAG SENSOR
ASSEMBLY)
(a) Disconnect the center airbag sensor assembly connector.
Text in Illustration
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance: