Venza AWD V6-3.5L (2GR-FE) (2010)
/Page-1127001.png)
Accelerator Pedal: Service and Repair
Removal
2GR-FE ENGINE CONTROL: ACCELERATOR PEDAL: REMOVAL
1. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY
(a) Disconnect the accelerator pedal sensor assembly connector.
(b) Remove the 2 bolts and accelerator pedal sensor assembly.
NOTICE:
*
Avoid physical shocks to the accelerator pedal sensor assembly.
*
Do not disassemble the accelerator pedal sensor assembly.
