Venza AWD V6-3.5L (2GR-FE) (2010)
(b) Check the resistance.
(1) Disconnect connectors A and C and measure the resistance between the terminals of the connectors.
Standard Resistance (Fig. 2):
HINT
Measure the resistance while lightly shaking the wire harness vertically and horizontally.
*
If the results match the values specified above, an open circuit exists between terminal 1 of connector A and terminal 1 of connector C.
(2) Disconnect connector B and measure the resistance between the terminals of the connectors.
Standard Resistance (Fig. 3):
*
If the results match the values specified above, an open circuit exists between terminal 1 of connector B2 and terminal 1 of connector
C.
(c) Check the voltage.