Venza AWD V6-3.5L (2GR-FE) (2010)
Transmission Speed Sensor: Service and Repair
Installation
U660F AUTOMATIC TRANSMISSION / TRANSAXLE: SPEED SENSOR: INSTALLATION
1. INSTALL SPEED SENSOR
(a) Coat the 2 bolts with ATF.
(b) Install the speed sensor to the valve body with the 2 bolts.
Torque : 11 Nm (112 kgf-cm, 8 ft-lbf)
(c) Connect the connector.
2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Valve
Body/Service and Repair/Removal and Replacement/Installation
3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Valve
Body/Service and Repair/Removal and Replacement/Installation
4. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Valve Body/Service and Repair/Removal and Replacement/Installation
5. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY
HINT
See the steps from "Install Transfer Assembly" through "Install Engine Assembly with Transaxle" See: Transmission and
Drivetrain/Automatic Transmission/Transaxle/Service and Repair/Removal and Replacement/Installation.