Venza AWD V6-3.5L (2GR-FE) (2010)
Text in Illustration
SST : 09268-31012
09268-41500
90467-13001
95336-08070
SST : 09268-45014
09268-41200
09268-41220
09268-41250
(f) Wipe up any gasoline.
(g) Connect the cable to the negative (-) battery terminal.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
(h) Connect the Techstream to the DLC3.
(i) Enter the following menus: Powertrain / Engine / Active Test / Control the Fuel Pump / Speed.
(j) Measure the fuel pressure.
Standard fuel pressure:
304 to 343 kPa (3.1 to 3.5 kgf*cm2, 44 to 50 psi)
*
If the fuel pressure is greater than the standard value, replace the fuel pressure regulator.