Venza AWD V6-3.5L (2GR-FE) (2010)
Spark Plug: Service and Repair
Removal
2GR-FE ENGINE CONTROL: IGNITION COIL AND SPARK PLUG: REMOVAL
1. REMOVE NO. 1 ENGINE UNDER COVER
2. REMOVE NO. 2 ENGINE UNDER COVER
3. DRAIN ENGINE COOLANT See: Engine, Cooling and Exhaust/Cooling System/Coolant/Service and Repair
4. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY
(a) Remove the windshield wiper motor and link assembly See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Removal.
5. REMOVE COWL TOP PANEL OUTER SUB-ASSEMBLY See: Steering and Suspension/Suspension/Suspension Strut / Shock
Absorber/Service and Repair/Front Shock Absorber/Removal
6. REMOVE COOL AIR INTAKE DUCT SEAL See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
7. REMOVE V-BANK COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Removal
8. REMOVE AIR CLEANER CAP WITH HOSE See: Fuel Delivery and Air Induction/Throttle Body/Service and Repair/Removal
9. REMOVE INTAKE AIR SURGE TANK ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Removal
10. REMOVE NO. 1 SURGE TANK STAY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Unit/Removal
11. REMOVE IGNITION COIL ASSEMBLY
(a) Disconnect the 3 wire harness clamps.
(b) Disconnect the 6 ignition coil connectors.
(c) Remove the 6 bolts and 6 ignition coils.