Venza AWD V6-3.5L (2GR-FE) (2010)
/Page-64001.png)
Headlamp Dimmer Relay: Testing and Inspection
LIGHTING (EXT): RELAY: ON-VEHICLE INSPECTION
1. INSPECT TAILLIGHT RELAY (TAIL)
(a) Remove the taillight relay from the main body ECU (driver side junction block assembly).
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(c) If the result is not as specified, replace the taillight relay.
2. INSPECT FOG LIGHT RELAY (FOG)
(a) Remove the fog light relay from the main body ECU (driver side junction block assembly).
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(c) If the result is not as specified, replace the fog light relay.
