Venza AWD V6-3.5L (2GR-FE) (2010)
22. REMOVE REAR SEAT ASSEMBLY RH (for RH Side) See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly (for RH Side)/Removal
23. REMOVE RECLINING REMOTE CONTROL BEZEL See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
and Replacement/Removal
24. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Removal
25. DISCONNECT REAR SEAT OUTER BELT ASSEMBLY
(a) Remove the bolt and disconnect the floor end of the rear seat outer belt assembly.
26. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH (for LH Side) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Removal
27. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH (for RH Side) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Removal
28. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
and Replacement/Removal
29. REMOVE REAR SEAT OUTER BELT ASSEMBLY
(a) Remove the bolt and disconnect the shoulder anchor of the rear seat outer belt assembly.
(b) Remove the 2 bolts.
(c) Disengage the 2 guides and remove the rear seat outer belt assembly
Installation
SEAT BELT: REAR SEAT OUTER BELT ASSEMBLY: INSTALLATION
1. INSTALL REAR SEAT OUTER BELT ASSEMBLY