Venza AWD V6-3.5L (2GR-FE) (2010)
Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)
NOTICE:
Do not allow the anchor part of the rear seat outer belt assembly to overlap the protruding part of the floor panel.
6. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Installation
7. INSTALL RECLINING REMOTE CONTROL BEZEL See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
and Replacement/Installation
8. INSTALL REAR SEAT ASSEMBLY LH (for LH Side) See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly (for LH Side)/Installation
9. CONNECT REAR SEAT NO. 2 RECLINING CONTROL CABLE SUB-ASSEMBLY (for LH Side) See: Body and Frame/Seats/Service and
Repair/Removal and Replacement/Rear Seat Assembly (for LH Side)/Installation
10. INSTALL REAR SEAT OUTER TRACK BRACKET COVER (for LH Side) See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Rear Seat Assembly (for LH Side)/Installation
11. INSTALL REAR SEAT INNER TRACK BRACKET COVER (for LH Side) See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Rear Seat Assembly (for LH Side)/Installation
12. INSTALL REAR SEAT HEADREST ASSEMBLY (for LH Side) See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Rear Seat Assembly (for LH Side)/Installation
13. INSTALL REAR SEAT ASSEMBLY RH (for RH Side) See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly (for RH Side)/Installation
14. CONNECT REAR SEAT RECLINING CONTROL CABLE SUB-ASSEMBLY (for RH Side) See: Body and Frame/Seats/Service and
Repair/Removal and Replacement/Rear Seat Assembly (for RH Side)/Installation
15. INSTALL REAR SEAT OUTER TRACK BRACKET COVER (for RH Side) See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Rear Seat Assembly (for RH Side)/Installation
16. INSTALL REAR SEAT INNER TRACK BRACKET COVER (for RH Side) See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Rear Seat Assembly (for RH Side)/Installation
17. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY (for RH Side) See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Rear Seat Assembly (for RH Side)/Installation
18. INSTALL REAR SEAT HEADREST ASSEMBLY (for RH Side) See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Rear Seat Assembly (for RH Side)/Installation
19. INSTALL REAR FLOOR FINISH PLATE See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
20. INSTALL REAR SEAT SUB FLOOR PANEL ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Installation
21. INSTALL NO. 1 DECK BOARD See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
22. INSTALL DECK SIDE TRIM BOX LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
23. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
24. INSTALL DECK SIDE TRIM BOX RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
25. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation