Venza AWD V6-3.5L (2GR-FE) (2010)
Parking Brake Warning Switch: Service and Repair
Installation
PARKING BRAKE: PARKING BRAKE SWITCH: INSTALLATION
1. INSTALL PARKING BRAKE SWITCH ASSEMBLY
(a) Install the parking brake switch assembly with the screw.
Torque : 0.9 Nm (9 kgf-cm, 8 in-lbf)
2. INSTALL PARKING BRAKE PEDAL ASSEMBLY
(a) Install the parking brake pedal assembly with the 3 nuts.
Torque : 21 Nm (214 kgf-cm, 15 ft-lbf)
(b) Connect the parking brake switch connector.
(c) Install the No. 1 parking brake cable assembly with the bolt and nut.