Venza AWD V6-3.5L (2GR-FE) (2010)
16. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Removal
17. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Removal
18. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Removal
19. REMOVE POSITION INDICATOR HOUSING ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Removal
20. REMOVE CONSOLE BOX SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Removal
21. REMOVE NO. 4 CENTER MEMBER FLOOR REINFORCE SUB-ASSEMBLY
(a) Turn back the floor carpet.
(b) Remove the 7 bolts and No. 4 center member floor reinforce sub-assembly.
22. REMOVE YAW RATE AND ACCELERATION SENSOR
(a) Disconnect the connector from the yaw rate and acceleration sensor with bracket.
(b) Remove the 2 bolts and yaw rate and acceleration sensor with bracket.
(c) Remove the 2 nuts and yaw rate and acceleration sensor from the bracket.