Venza AWD V6-3.5L (2GR-FE) (2010)
Refrigerant Pressure Sensor / Switch: Service and Repair
Installation
HEATING / AIR CONDITIONING: AIR CONDITIONING PRESSURE SENSOR: INSTALLATION
1. INSTALL AIR CONDITIONING PRESSURE SENSOR
(a) Sufficiently apply compressor oil to a new air conditioning pressure sensor.
Compressor oil:
ND-OIL 8 or equivalent
(b) Install the air conditioning pressure sensor.
Torque : 11 Nm (112 kgf-cm, 8 ft-lbf)
(c) Connect the connector.
2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
3. CHARGE WITH REFRIGERANT See: Heating and Air Conditioning/Service and Repair
4. WARM UP ENGINE See: Heating and Air Conditioning/Service and Repair
5. INSPECT FOR REFRIGERANT LEAK See: Heating and Air Conditioning/Service and Repair