Venza AWD V6-3.5L (2GR-FE) (2010)
Crankshaft Position Sensor: Service and Repair
Installation
2GR-FE ENGINE CONTROL: CRANKSHAFT POSITION SENSOR: INSTALLATION
1. INSTALL CRANK POSITION SENSOR
(a) Apply a light coat of engine oil to the O-ring on the crank position sensor.
Text in Illustration
(b) Install the crank position sensor with the bolt.
Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)
(c) Connect the crank position sensor connector.
2. INSTALL COMPRESSOR AND MAGNETIC CLUTCH
(a) Install the compressor and magnetic clutch See: Heating and Air Conditioning/Compressor HVAC/Service and Repair/Removal and
Replacement/Installation.