Venza AWD V6-3.5L (2GR-FE) (2010)
Washer Fluid Level Switch: Service and Repair
Installation
WIPER / WASHER: WASHER LEVEL WARNING SWITCH: INSTALLATION
1. INSTALL WASHER LEVEL WARNING SWITCH ASSEMBLY
(a) Install the washer level warning switch assembly.
(b) Connect the connector.
(c) Connect the washer hose.
2. FILL WASHER JAR WITH WASHER FLUID See: Wiper and Washer Systems/Windshield Washer Motor/Service and Repair/Washer Motor
(for Front Side)/Installation
3. INSTALL FRONT FENDER LINER RH See: Wiper and Washer Systems/Windshield Washer Motor/Service and Repair/Washer Motor (for
Front Side)/Installation
4. INSTALL FRONT FENDER OUTSIDE MOULDING RH
HINT
Use the same procedure for the RH side and LH side See: Body and Frame/Doors, Hood and Trunk/Hood/Hood Latch Release
Cable/Service and Repair/Installation.
5. INSTALL FRONT WHEEL RH