Venza AWD V6-3.5L (2GR-FE) (2010)
/Page-1587005.png)
2GR-FE BATTERY / CHARGING: GENERATOR: INSTALLATION
1. INSTALL GENERATOR ASSEMBLY
(a) Install the wire harness clamp with the bolt.
Torque : 8.4 Nm (86 kgf-cm, 74 in-lbf)
(b) Install the generator bracket with the 2 bolts.
Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)
(c) Connect the wire harness clamp.
(d) Install the 2 bolts.
Torque : 43 Nm (438 kgf-cm, 32 ft-lbf)
(e) Connect the generator connector to the generator assembly.
(f) Install the generator wire with the nut.
Torque : 9.8 Nm (100 kgf-cm, 87 in-lbf)
(g) Install the terminal cap.
