Venza AWD V6-3.5L (2GR-FE) (2010)
Text in Illustration
(g) Remove the generator assembly from SST.
(h) Remove the clutch pulley from the rotor shaft.
6. REMOVE GENERATOR ROTOR ASSEMBLY
(a) Remove the generator washer.
(b) Remove the generator rotor assembly.
Reassembly
2GR-FE BATTERY / CHARGING: GENERATOR: REASSEMBLY
1. INSTALL GENERATOR ROTOR ASSEMBLY
(a) Place the drive end frame on the clutch pulley.
(b) Install the generator rotor assembly to the drive end frame.