Venza AWD V6-3.5L (2GR-FE) (2010)
Removal
POWER OUTLETS (INT): REAR POWER OUTLET SOCKET: REMOVAL
1. REMOVE REAR DOOR SCUFF PLATE RH
HINT
Use the same procedure for the RH side and the LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Removal.
2. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH
HINT
Use the same procedure for the RH side and the LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Removal.
3. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Removal
4. REMOVE DECK BOARD ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Removal
5. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Removal
6. REMOVE DECK SIDE TRIM BOX LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and