Venza AWD V6-3.5L (2GR-FE) (2010)
/Page-1570002.png)
(c) Disconnect the connector clamp from the ignition switch.
Installation
2GR-FE STARTING: IGNITION SWITCH: INSTALLATION
1. INSTALL IGNITION SWITCH
(a) Connect the connector.
(b) Install the connector clamp to the ignition switch.
(c) Install the ignition switch with the 2 screws.
2. INSTALL UPPER STEERING COLUMN COVER See: Steering and Suspension/Steering/Steering Column/Service and Repair/Removal and
Replacement/Installation
3. INSTALL LOWER STEERING COLUMN COVER See: Steering and Suspension/Steering/Steering Column/Service and Repair/Removal and
Replacement/Installation
