Venza AWD V6-3.5L (2GR-FE) (2010)
/Page-1608004.png)
Text in Illustration
(1) Measure the resistance between the segments of the commutator.
Standard Resistance:
Below 1 Ohms
(2) If the result is not as specified, replace the armature assembly.
(c) Check if the commutator is grounded.
Text in Illustration
(1) Measure the resistance between the commutator and armature coil core.
Standard Resistance:
10 kOhms or higher
(2) If the result is not as specified, replace the armature assembly.
(d) Using a vernier caliper, measure the commutator length.
Text in Illustration
Standard length:
