Venza AWD V6-3.5L (2GR-FE) (2010)
Steering Control Module: Service and Repair
Installation
POWER ASSIST SYSTEMS: POWER STEERING ECU: INSTALLATION
1. INSTALL POWER STEERING ECU ASSEMBLY
(a) Engage the 4 wire harness clamps to the power steering ECU assembly.
(b) Install the power steering ECU assembly with the 3 nuts.
Torque : 14 Nm (138 kgf-cm, 10 ft-lbf)
(c) Securely connect the connector to the power steering ECU assembly.
HINT
Return the lock lever to its original position to connect the connector, and then securely push in the lock of the lock lever as shown in
the illustration.
(d) Connect the 3 connectors to the power steering ECU assembly.