Venza AWD V6-3.5L (2GR-FE) (2010)
/Page-1803002.png)
Text in Illustration
(c) Separate the steering intermediate shaft assembly from the steering link assembly.
5. SEPARATE TIE ROD ASSEMBLY LH
(a) Remove the cotter pin and nut.
(b) Install SST to the tie rod end.
SST : 09960-20010
09961-02060
NOTICE:
Make sure that the upper ends of the tie rod end and SST are aligned.
(c) Using SST, separate the tie rod end from the steering knuckle.
