Venza AWD V6-3.5L (2GR-FE) (2010)
Torque : 2.4 Nm (25 kgf-cm, 21 in-lbf)
6. INSTALL CRUISE CONTROL SWITCH WIRE
7. INSTALL CRUISE CONTROL MAIN SWITCH See: Cruise Control/Cruise Control Switch/Service and Repair/Installation
8. INSTALL STEERING WHEEL DAMPER
(a) Install the steering wheel damper to the steering wheel sub-assembly.
(b) Install the 2 screws.
Torque : 2.4 Nm (25 kgf-cm, 21 in-lbf)
9. TURN FRONT WHEELS TO FACE STRAIGHT AHEAD
10. ADJUST SPIRAL CABLE See: Restraint Systems/Air Bag Systems/Clockspring Assembly / Spiral Cable/Service and Repair/Installation
11. INSTALL STEERING WHEEL ASSEMBLY
(a) Align the matchmarks on the steering wheel assembly and steering main shaft.
Text in Illustration
(b) Install the steering wheel assembly set nut.
Torque : 50 Nm (510 kgf-cm, 37 ft-lbf)
(c) Connect the connectors to the spiral cable sub-assembly.
12. INSTALL STEERING PAD See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering Pad/Installation
13. INSTALL LOWER NO. 3 STEERING WHEEL COVER See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering
Pad/Installation
14. INSTALL LOWER NO. 2 STEERING WHEEL COVER See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering
Pad/Installation