Venza AWD V6-3.5L (2GR-FE) (2010)
4. INSTALL FRONT LOWER SUSPENSION ARM
(a) Install the front lower suspension arm to the front lower ball joint with the bolt and 2 nuts.
Torque : 92 Nm (938 kgf-cm, 68 ft-lbf)
5. CONNECT TIE ROD ASSEMBLY See: Steering/Steering Gear/Service and Repair/Installation
6. INSTALL FRONT DISC See: Brakes and Traction Control/Disc Brake System/Service and Repair/Front Brake/Installation
7. INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY
(a) Install the front disc brake caliper assembly to the steering knuckle with the 2 bolts.
Torque : 104 Nm (1060 kgf-cm, 77 ft-lbf)
8. INSTALL FRONT SPEED SENSOR
(a) Install the clamp and front speed sensor with the bolt.
Text in Illustration
Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
NOTICE:
*
Prevent foreign matter from attaching to the sensor tip.
*
Firmly insert the sensor body into the knuckle before tightening the bolt.