Venza AWD V6-3.5L (2GR-FE) (2010)
/Page-1819006.png)
Bolt 1, 2 - Torque : 200 Nm (2039 kgf-cm, 147 ft-lbf)
Bolt 3 - Torque : 206 Nm (2100 kgf-cm, 152 ft-lbf)
HINT
Start installing the bolts from the front of the vehicle.
2. TEMPORARILY TIGHTEN ENGINE MOUNTING INSULATOR LH (for 2GR-FE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Installation
3. TEMPORARILY TIGHTEN ENGINE MOUNTING INSULATOR LH (for 1AR-FE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Installation
4. INSTALL FRONT FRAME ASSEMBLY (for 2GR-FE) See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Installation
5. INSTALL FRONT FRAME ASSEMBLY (for 1AR-FE) See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Installation
6. INSTALL REAR ENGINE MOUNTING INSULATOR (for 1AR-FE AWD) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Installation
7. FULLY TIGHTEN ENGINE MOUNTING INSULATOR LH (for 2GR-FE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Installation
8. FULLY TIGHTEN ENGINE MOUNTING INSULATOR LH (for 1AR-FE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Installation
9. INSTALL STEERING LINK ASSEMBLY (for AWD) See: Steering/Steering Gear/Service and Repair/Installation
10. INSTALL FRONT STABILIZER BAR WITH FRONT STABILIZER LINK ASSEMBLY (for AWD)
11. INSTALL FRONT NO. 1 STABILIZER BRACKET LH (for AWD) See: Stabilizer Bar/Service and Repair/Front Stabilizer Bar/Installation
12. INSTALL FRONT NO. 1 STABILIZER BRACKET RH (for AWD)
HINT
Perform the same procedure as the LH side.
13. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE (for 2GR-FE)
HINT
Refer to the procedure form Install Engine Assembly with Transaxle See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Installation.
14. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE (for 1AR-FE)
HINT
Refer to the procedure form Install Engine Assembly with Transaxle See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Installation.
