Venza AWD V6-3.5L (2GR-FE) (2010)
30. REMOVE REAR NO. 2 DIFFERENTIAL MOUNT CUSHION See: Transmission and Drivetrain/Differential Assembly/Differential
Mount/Service and Repair/Removal
31. REMOVE REAR SUSPENSION MEMBER BODY MOUNTING FRONT CUSHION (for LH Side)
(a) Using SST, remove the rear suspension member body mounting front cushion.
Text in Illustration
SST : 09830-10010
09830-01010
09830-01040
09830-01050
SST : 09950-40011
09951-04020
09952-04010
09954-04010
09955-04011
09958-04011
NOTICE:
*
Set the tips of the claws in the cutouts of the body mounting cushion.
*
Securely install the spacer No. 1 to the inner cylinder of the body mounting cushion as shown in the illustration.
*
Apply a small amount of grease to the threads of SST (center bolt) before use.
*
Tighten SST slowly and evenly.
*
Be careful as the body mounting cushion may fly out.
*
The body mounting cushion cannot be reused.
32. REMOVE REAR SUSPENSION MEMBER BODY MOUNTING FRONT CUSHION (for RH Side)
HINT
Perform the same procedure as the LH side.