Venza AWD V6-3.5L (2GR-FE) (2010)
36. REMOVE REAR NO. 2 BODY MOUNTING BRACKET SUB-ASSEMBLY LH
(a) Remove the 3 bolts and rear No. 2 body mounting bracket sub-assembly LH.
37. REMOVE REAR NO. 2 BODY MOUNTING BRACKET SUB-ASSEMBLY RH
HINT
Perform the same procedure as the LH side.
38. REMOVE STUD BOLT (for LH Side)
(a) Remove the stud bolt.
39. REMOVE STUD BOLT (for RH Side)
HINT
Perform the same procedure as the LH side.