Venza AWD V6-3.5L (2GR-FE) (2010)
6. INSTALL REAR SUSPENSION MEMBER BODY MOUNTING FRONT CUSHION (for LH Side)
(a) Temporarily install a new rear suspension member body mounting front cushion while confirming the installation direction.
(b) Using SST, install the rear suspension member body mounting front cushion until there is no clearance between the suspension member sub-
assembly and the rear suspension member body mounting front cushion.
Text in Illustration
SST : 09830-10010
09830-01010
09830-01020
09830-01030
09830-01060
NOTICE:
*
Tighten SST slowly and evenly.
*
Apply a small amount of grease to the threads of SST (center bolt) before use.
*
Install the side marked "F" of SST to the body mounting cushion.
7. INSTALL REAR SUSPENSION MEMBER BODY MOUNTING FRONT CUSHION (for RH Side)