toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Fluid Pan, A/T > < Fluid - A/T|Capacity Specifications|Page 4239
Page 11
background image

Torque : 40 Nm (408 kgf-cm, 30 ft-lbf)

(d) Install the refill plug with a new gasket.

Torque : 49 Nm (500 kgf-cm, 36 ft-lbf)

(e) Lower the vehicle.

(f) Turn the ignition switch off.

HINT
Turning the ignition switch off exits the fluid temperature detection mode.

(g) Remove the Techstream from the DLC3 (when using the Techstream).

8. AFTER FILLING TRANSMISSION

(a) Lift the vehicle.

(b) Clean each part.

(c) Check for fluid leaks.

(d) Install the front fender apron LH and No. 2 engine under cover.

(e) Lower the vehicle.

Fluid Pan, A/T > < Fluid - A/T|Capacity Specifications|Page 4239