Venza AWD V6-3.5L (2GR-FE) (2010)
Text in Illustration
(1) Using a screwdriver with vinyl tape wound around tip, remove the front transaxle case oil seal.
NOTICE:
Be careful not to damage the housing.
(b) for Inside:
(1) Using SST, tap out the front transaxle case oil seal.
SST : 09308-00010
NOTICE:
Be careful not to damage the housing.
3. INSTALL FRONT TRANSAXLE CASE OIL SEAL
(a) for Inside:
(1) Coat the lip of a new front transaxle case oil seal with MP grease.
(2) Using SST and a hammer, tap in the front transaxle case oil seal.