Venza AWD V6-3.5L (2GR-FE) (2010)
SST : 09950-60010
09951-00410
SST : 09950-70010
09951-07200
Oil seal driven in depth:
21.5 to 22.5 mm (0.846 to 0.886 in.)
(b) for Outside:
(1) Coat the lip of a new front transaxle case oil seal with MP grease.
(2) Using SST and a hammer, tap in the front transaxle case oil seal.
SST : 09649-17010
SST : 09950-70010
09951-07200
Oil seal driven in depth:
5.5 to 6.5 mm (0.217 to 0.256 in.)
NOTICE:
Check that the oil seal is installed in the correct direction.
4. INSTALL TRANSFER ASSEMBLY
HINT
See: Transfer Case/Service and Repair/Removal and Replacement/Installation