Venza AWD V6-3.5L (2GR-FE) (2010)
/Page-1349004.png)
(b) Remove the O-ring from the oil strainer.
Text in Illustration
4. REMOVE TRANSMISSION VALVE BODY ASSEMBLY
(a) Remove the 11 bolts and valve body from the transaxle.
NOTICE:
When removing the transmission valve body assembly, be careful not to allow the transmission revolution sensor and the transaxle
case to interfere with each other.
5. REMOVE MANUAL VALVE
(a) Remove the manual valve from the valve body.
Installation
U660F AUTOMATIC TRANSMISSION / TRANSAXLE: VALVE BODY ASSEMBLY: INSTALLATION
