Venza AWD V6-3.5L (2GR-FE) (2010)
Wiring Harness: Service and Repair
Removal
U660F AUTOMATIC TRANSMISSION / TRANSAXLE: TRANSMISSION WIRE: REMOVAL
1. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY
HINT
See the steps from "Remove Engine Assembly with Transaxle" through "Remove Transfer Assembly" See: Service and
Repair/Removal and Replacement/Removal.
2. REMOVE AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY See: Valve Body/Service and Repair/Removal and
Replacement/Removal
3. REMOVE VALVE BODY OIL STRAINER ASSEMBLY See: Valve Body/Service and Repair/Removal and Replacement/Removal
4. REMOVE TRANSMISSION VALVE BODY ASSEMBLY See: Valve Body/Service and Repair/Removal and Replacement/Removal
5. REMOVE TRANSMISSION WIRE
(a) Disconnect the 9 connectors.
(b) Remove the transmission wire from the clamp.
(c) Remove the bolt, lock plate, and transmission wire from the valve body.