Venza AWD V6-3.5L (2GR-FE) (2010)
Control Module: Service and Repair
Removal
MF1A TRANSFER / 4WD / AWD: 4WD CONTROL ECU: REMOVAL
1. REMOVE FRONT DOOR SCUFF PLATE RH
2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH
3. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
4. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Removal
5. REMOVE 4WD CONTROL ECU
(a) Disconnect the connector.
(b) Remove the 2 nuts and ECU.