Venza AWD V6-3.5L (2GR-FE) (2010)
Seals and Gaskets: Service and Repair
Front Oil Seal (for RH Side)
Components
MF1A TRANSFER / 4WD / AWD: TRANSFER CASE FRONT OIL SEAL (for RH Side): COMPONENTS
Replacement
MF1A TRANSFER / 4WD / AWD: TRANSFER CASE FRONT OIL SEAL (for RH Side): REPLACEMENT
1. DRAIN TRANSFER OIL
(a) Remove the transfer drain plug and gasket to drain the transfer oil.
(b) Install a new gasket and the transfer drain plug.
Torque : 49 Nm (500 kgf-cm, 36 ft-lbf)
2. REMOVE FRONT DRIVE SHAFT ASSEMBLY RH
See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Removal and Replacement/Front Drive Shaft
Assembly/Removal.
3. REMOVE TRANSFER CASE FRONT OIL SEAL
(a) Using SST, remove the transfer case front oil seal from the transfer case.
SST : 09308-00010