Venza AWD V6-3.5L (2GR-FE) (2010)
/Page-2882002.png)
Text in Illustration
(2) If the result is not as specified, replace the power window regulator switch assembly (for rear LH side).
2. INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY (for Rear RH)
(a) Check the switch function.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
(2) If the result is not as specified, replace the power window regulator switch assembly (for rear RH side).
(b) Check that the LED illuminates.